Registration will free up additional functions in the software. The log that you send us to register will enable future users to benefit from your experience and create a list of EOBD compatible vehicles and the functions it supports. Registration is free of charge and only requires a few minutes.
Go to our online shop www.boutiqueobdfacile.com and order the full version of the EOBD-Facile software. Note: If you have bought a klavkarr scanner in the store, you will automatically be entitled to the full version.
The software can only be used for diagnosis, not to reconfigure an ECU. Unfortunately, the EOBD standard does not include the airbag, ABS or ESP computers. I repeat in red NO DIAGNOSIS OF ABS, AIRBAG OR ESP POSSIBLE. In this case, only the manufacturer's kit can do a diagnosis.
the good thing about OBD-II was it defined a limited set of network types that a car maker could implement for the emissions related diagnostics. this meant that tools to interface with those networks could also become standardized and inexpensive. called scan-tools, they come in full-featured versions with built-in software/display/buttons, and dumb versions that must be connected to a PC/Mac/tablet/phone to be useful.
I have started my own project after having troubles working with windows obd software and also with pyobd. The program has barely reached Version 0.0000001 but is able to get standard OBD Information.
I have a bluetooth type elm scan tool ELM327. I can scan my ecu for trouble codes but i am having a hard time calibrating my throttle body and start clutch for my cvt transmission. I dunno if this is possible with this scan tool and what other softwares are available. I am using windows platform and most of the softwares fail to connect only few work well. I just dont wanna buy a 2000 dollars worth scan tool. You have a very interesting article. Keep it up and help me out in this if u can.
Can someone link to a free software to sniff CAN bus from my car using OBDLink LX OBD device. Most of the softwares I found online like CANvas, CANiBUS, CANdo etc needs some specific hardware like Kvaser.
"Bad" (or fake) interfaces are built on cheap microcontrollers like STM32F042, YM1130, BK3231Q, 25K80 QBD327 and unknown chips hidden under black drop of special varnish. Such interfaces are usually recognized as "Chineese version 2.1", however many unfair sellers are selling these as v1.5. Moreover, when connected to diagnostic software, poor interfaces can report version 1.5 so they are "fake v1.5" (actually they can show any number there). If "bad" interface is not trying to trick the user, than ELM327 Identifier will show that many v1.4 commands are not supported. However if fake ELM327 programmed to cheat diagnostic software, ELM327 Identifier can show same result as for good interface or even better.
ELM 327 iOS software designed to test cars. When self-surveying a machine using ELM 327 iOS adapters, you need to remember that the amount of information received will depend on the type of software for OBD 2.
If the user is the happy owner of Apple gadgets, you will need ELM 327 Wi-Fi to connect your smartphone or tablet. So what software for OBD 2 is required to download? In recent years, a wide variety of such programs has appeared. Thanks to such applications, it is possible to provide 100% pairing of the machine with the ELM 327 and implementation of a comprehensive auto diagnostics.
To start using it, you only need to place the adapter in the OBD 2 slot of the machine and install the software on the iPhone / iPad. After that, you can immediately begin the inspection of the car, or rather, for a separate and most important part of it - the engine. And for a number of car models, the options for checking the automatic gearbox and airbags are available.
The second option is more convenient and simpler, since it does not involve the use of wires, which is often inconvenient. Allows you to diagnose and configure the engine through a computer, tablet or phone. Depending on which work will be carried out, and you need to select software for.
The system was developed by Canadian company Elmelectronics. They have developed a unique system chip on which the device is currently operating. The development is relatively new, but it has been working stably for a long time and has proven itself well.
Although manufacturers declare the presence of a program for conversion, in fact, devices sold in the territory of the CIS countries are only adapters themselves. They contain only the original chip itself, while all the software for transcoding needs to be downloaded and installed additionally. It is worth noting that in the CIS and the cost of such devices is lower than the world average.
Like any software, programs for working with the autodiagnostic adapter are subdivided, depending on which operating system they have to work on. For and on the basis of Android developed a lot of such applications. They may have an internal specialization in terms of the type of operating system, the characteristics of its firmware, etc.
The main positive feature of this software is the highest versatility. The application is able to work with cars of many brands (Fiat, Kia, Renault. Nissan, Infinity, etc.). To do this, you need to download exactly the application that was developed for a specific car brand.
Although the program is intended solely to work with Fiat engines, it still enjoys considerable popularity. It works stably and without interruption. That is why this software Fiat owners download almost always.
Popular software with the broadest functionality. Displays both current time parameters and diagnostic data for a specific period in the form of a report. Most functions are unlimited available, despite the fact that only the Lite version of the application is distributed for free.
Among all Android applications, users identify the Torque program for its functionality. The program interacts with all models. bluetooth adapter and can serve as an onboard computer. If such a novelty is not installed in your car, then you yourself can supplement it with such happiness. The software offers everything that is needed for the diagnosis, and sometimes much more features. For example, you can always focus on the sensor readings for fuel consumption, while removing or clearing errors from the unit. The developers did not try in vain, because the program simplifies the task of diagnostics, because it is made in the Russian version, which opens up the possibility for all drivers to use it. You can choose the desired screen from 15 possible. The opportunity to display information in the form of graphs, digital values, dial.
If you choose from the most modern models that have recently entered the market, but have already managed to conquer many car owners, then you should pay attention to the OBD Avtodoktor program. The software works with ELM 37 by means of Android devices. In this case, the advantage of the program is its Russian interface and an extensive list of various functions.
If you stocked up with USB and an OBD-II adapter, then this is not an indicator that such software is enough for diagnostics. To guarantee such conditions can software under Windows, which will be the best solution this question. In this case, successful diagnostics can provide not only USB, but also a PC, laptop or tablet, which already has the Windows operating system. It is only necessary to select and install the appropriate program and carry out the necessary work.
If you care about the condition of the car, but you do not want to spend your time and money on visiting the service station, then you should install such programs on your devices and carry out diagnostics on your own. ELM327, OBD-2, USB, Bluetooth and Wi-Fi - this is all that is needed for diagnosis, all this functionality is available in your PC, tablet or smartphone. Not so difficult to choose for your OS, whether it is Windows, iOS or Android software for diagnosis.
The program allows you to connect to the engine control unit and read / erase codes (most codes are read and presented in Russian), output the current data in digital or graphical form, freeze frames, vehicle VIN number, unit version and firmware version offlinei.e. no internet connection - the client software with ELM327 functions operates independently of the MotorData maternal diagnostic online system. The article contains screenshots taken during the diagnosis of real cars: the 2003 right-hand drive Toyota Estima and the 2008 Subaru Forester SH.
Special program module that allows you to read vehicle identification information. This is the data on the VIN number of the car, the version of the control unit and the firmware version. This information can be useful both for additional authentication of vehicle identification numbers and for diagnostic purposes. For example, some manufacturers require faults to be fixed by a simple update. software or, on the contrary, errors cannot be properly eliminated without replacing the control unit. The output of this information depends on whether the function being diagnosed is supported by the vehicle.
Free programs for working with ELM327 or K-Line-adapter under WindowsFor ELM327ELM327 adapters allow you to diagnose the engine management system on many modern cars (KIA, Hyundai, Mazda, Toyota, Subaru, Lada, etc.)Diagnoses faults on the engine (as well as the automatic transmission - if the control unit is one on two systems), support diagnostics both on the K-line and on the CAN bus, allows erasing codes and quenching the fault indication (Check Engine), deciphers the codes into Russian malfunctions (DTC), viewing the data of the freeze frame of the malfunction code, reading the current data of the power unit control unit (PCM) (sensors and design parameters), reading information about the car (if entered into the control unit).It definitely will not work with VAG group cars (Audi, VW, Seat, Porche) - for them there is Vasya's diagnostic program for the K-Line adapter, with our old brands (first injectors).Motordata ELM327 (RUS)Free software for ELM327 in Russian from Legion AvtodataAllows using the laptop and the adapter ELM327 (USB or Bluetooth) to organize extensive engine diagnostics functions. A distinctive feature of the program is additional opportunity Motordata ELM327 diagnose right-hand drive Toyota.Scantoolnet (ENG)The program is free, distributed "as is" without any guarantees.This program is free software; you can redistribute it and / or modify it.WITHOUT ANY WARRANTY; Without even the implied warranty of mercury for a particulary or for a party. See the GNU General Public License for more details.EasyOBD-II (ENG) simple program with full OBD-II functionality. Two versionsEasyObdII 2.4.5 EasyObdII 2.4.8 Check out the Free Software LicenseFor K-Line adapterChevroletExplorer The program "Chevrolet Explorer" is designed to diagnose electronic control units (ECU) of Chevrolet cars. Works with systems: engine management, automatic transmission, ABS, airbags.Attention! The program does not work with ELM327 adapters, the program requires a regular K-Line adapter.The program does not provide for its commercial use. The authors of the program are not responsible for any damage caused to anyone when using this program.The main features of the program: Reading and displaying computer parameters in digital and graphical form. Reading and resetting computer error codes. Read Identity. Export data to Excel.Calculation of fuel consumption.AT this moment the program supports diagnostics of ECU Bosch M22.214.171.124, SiriusD3 / SiriusD32, SiriusD4 / SiriusD42, MR-140 / HV-240; AISIN-81, ZF-4P16; ABS Bosch 5.3, ABS TEVES, ABS Delphi, ABS Mando; SRS.0, SRS.1GAZ-DiagnosisThe program is designed to diagnose UAZ and GAZ vehicles with engines equipped with electronic system fuel injection control with MIKAS-5.4, MIKAS-7 controllers and their modifications.All rights to this program belong to LLC A2, Ulyanovsk.The program is distributed free of charge.Claims associated with the use of the program are not accepted.This program operates on an IBM-PC / AT personal computer in conjunction with an RS-232 / K-Line adapter. Operating system MS Windows 98, MS Windows 2000, MS Windows XP.Vasya diagnostician ( free version 1.1.0)Professional tool VASYA diagnostician in Russian for the diagnosis of cars of concern VAG: Audi, VW. For KKL adapter (cars with CAN-bus are not supported - use the paid version).* for the following operating systems Windows: Windows 2000, Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2There are links to the official websites of software manufacturers to download the latest versions.A set of drivers for USB adapters ELM327 and K-Line adapters(microchip adapter drivers "USBCOM (RS232) ", i.e. so-called drivers "Virtual COM port") for popular chips: 2b1af7f3a8